Empathy List Archives

JM

John McCabe

Tue, Jun 28, 2022 3:36 PM

Is Angry Viper abandoned?

The README on the repo at GitLab says installation is documented in section 3.4 of the v2.0.0 installation guide, but it doesn't appear to get a mention at all on the later documents.

There's some reference to an OpenCPI GUI; I had a go with that recently but it appeared to be in a bit of an alpha state (i.e. didn't work at all well).

FWIW, I'm a software engineer and just interested in being able to browse through the C++ stuff with navigation between:

Example application
BSP
OpenCPI stuff

In the same sort of way I can work with projects in Eclipse, Visual Studio etc. Is there any way to do that? I couldn't see anything that stood out as such in the documentation.

John McCabe
Principal Software Engineer
Kirintec Ltd

+44 (0) 1989 568350
+44 7551 547 473

jmccabe@kirintec.com

www.kirintec.com
Follow us:

Receipt of this e-mail is subject to conditions, view our email disclaimer. Kirintec Limited of Ross-on-Wye HR9 5PB is registered in England and Wales with the company number 6699502. Unless otherwise stated, the information contained in this email and its attachments are strictly confidential.

Is Angry Viper abandoned? The README on the repo at GitLab says installation is documented in section 3.4 of the v2.0.0 installation guide, but it doesn't appear to get a mention at all on the later documents. There's some reference to an OpenCPI GUI; I had a go with that recently but it appeared to be in a bit of an alpha state (i.e. didn't work at all well). FWIW, I'm a software engineer and just interested in being able to browse through the C++ stuff with navigation between: 1. Example application 2. BSP 3. OpenCPI stuff In the same sort of way I can work with projects in Eclipse, Visual Studio etc. Is there any way to do that? I couldn't see anything that stood out as such in the documentation. John McCabe Principal Software Engineer Kirintec Ltd +44 (0) 1989 568350 +44 7551 547 473 jmccabe@kirintec.com www.kirintec.com Follow us: Receipt of this e-mail is subject to conditions, view our email disclaimer. Kirintec Limited of Ross-on-Wye HR9 5PB is registered in England and Wales with the company number 6699502. Unless otherwise stated, the information contained in this email and its attachments are strictly confidential.

AO

Aaron Olivarez

Tue, Jun 28, 2022 5:02 PM

Hi John,

We no longer support the Angry Viper eclipse plugin for OpenCPI. As of
OpenCPI v2.3.4 documentation for it was removed. You are correct, the
replacement for it is the OpenCPI GUI and it is currently in a Beta state.

At this time there is no documentation related to working with OpenCPI
assets within an integrated development environment (IDE).

Aaron

On Tue, Jun 28, 2022 at 10:36 AM John McCabe jmccabe@kirintec.com wrote:

Is Angry Viper abandoned?

The README on the repo at GitLab says installation is documented in
section 3.4 of the v2.0.0 installation guide, but it doesn’t appear to get
a mention at all on the later documents.

There’s some reference to an OpenCPI GUI; I had a go with that recently
but it appeared to be in a bit of an alpha state (i.e. didn’t work at all
well).

FWIW, I’m a software engineer and just interested in being able to browse
through the C++ stuff with navigation between:

1. Example application
2. BSP
3. OpenCPI stuff

In the same sort of way I can work with projects in Eclipse, Visual Studio
etc. Is there any way to do that? I couldn’t see anything that stood out as
such in the documentation.

John McCabe
Principal Software Engineer
Kirintec Ltd

+44 (0) 1989 568350
+44 7551 547 473 <+44%207551%20547%20473>

jmccabe@kirintec.com jmccabe@kirintec.com

www.kirintec.com http://www.kirintec.com/
Follow us:
https://en-gb.facebook.com/Kirintec/
https://uk.linkedin.com/company/kirintec
https://twitter.com/KirintecLtd

https://www.kirintec.com/
Receipt of this e-mail is subject to conditions, view our
email disclaimer https://www.kirintec.com/terms-and-conditions/.
Kirintec Limited of Ross-on-Wye HR9 5PB is registered in England and Wales
with the company number 6699502. Unless otherwise stated, the information
contained in this email and its attachments are strictly confidential.

discuss mailing list -- discuss@lists.opencpi.org
To unsubscribe send an email to discuss-leave@lists.opencpi.org

Hi John, We no longer support the Angry Viper eclipse plugin for OpenCPI. As of OpenCPI v2.3.4 documentation for it was removed. You are correct, the replacement for it is the OpenCPI GUI and it is currently in a Beta state. At this time there is no documentation related to working with OpenCPI assets within an integrated development environment (IDE). Aaron On Tue, Jun 28, 2022 at 10:36 AM John McCabe <jmccabe@kirintec.com> wrote: > Is Angry Viper abandoned? > > > > The README on the repo at GitLab says installation is documented in > section 3.4 of the v2.0.0 installation guide, but it doesn’t appear to get > a mention at all on the later documents. > > > > There’s some reference to an OpenCPI GUI; I had a go with that recently > but it appeared to be in a bit of an alpha state (i.e. didn’t work at all > well). > > > > FWIW, I’m a software engineer and just interested in being able to browse > through the C++ stuff with navigation between: > > > > 1. Example application > 2. BSP > 3. OpenCPI stuff > > > > In the same sort of way I can work with projects in Eclipse, Visual Studio > etc. Is there any way to do that? I couldn’t see anything that stood out as > such in the documentation. > > > John McCabe > Principal Software Engineer > Kirintec Ltd > > +44 (0) 1989 568350 > *+44 7551 547 473* <+44%207551%20547%20473> > > *jmccabe@kirintec.com* <jmccabe@kirintec.com> > > *www.kirintec.com* <http://www.kirintec.com/> > Follow us: > <https://en-gb.facebook.com/Kirintec/> > <https://uk.linkedin.com/company/kirintec> > <https://twitter.com/KirintecLtd> > > > > <https://www.kirintec.com/> > Receipt of this e-mail is subject to conditions, *view our > email disclaimer* <https://www.kirintec.com/terms-and-conditions/>. > Kirintec Limited of Ross-on-Wye HR9 5PB is registered in England and Wales > with the company number 6699502. Unless otherwise stated, the information > contained in this email and its attachments are strictly confidential. > _______________________________________________ > discuss mailing list -- discuss@lists.opencpi.org > To unsubscribe send an email to discuss-leave@lists.opencpi.org >

JM

John McCabe

Tue, Jun 28, 2022 5:29 PM

Thanks for that Aaron. Does an “Issue” need to be raised on the AngryViper repo to get the readme updated to clarify that?

John McCabe
Principal Software Engineer
Kirintec Ltd

+44 (0) 1989 568350
+44 7551 547 473

jmccabe@kirintec.com

www.kirintec.com
Follow us:

Receipt of this e-mail is subject to conditions, view our email disclaimer. Kirintec Limited of Ross-on-Wye HR9 5PB is registered in England and Wales with the company number 6699502. Unless otherwise stated, the information contained in this email and its attachments are strictly confidential.
From: Aaron Olivarez aaron@olivarez.info
Sent: 28 June 2022 18:02
To: John McCabe jmccabe@kirintec.com
Cc: discuss@lists.opencpi.org
Subject: Re: [Discuss OpenCPI] Angry Viper status

Hi John,

We no longer support the Angry Viper eclipse plugin for OpenCPI. As of OpenCPI v2.3.4 documentation for it was removed. You are correct, the replacement for it is the OpenCPI GUI and it is currently in a Beta state.

At this time there is no documentation related to working with OpenCPI assets within an integrated development environment (IDE).

Aaron

On Tue, Jun 28, 2022 at 10:36 AM John McCabe <jmccabe@kirintec.com mailto:jmccabe@kirintec.com> wrote:
Is Angry Viper abandoned?

The README on the repo at GitLab says installation is documented in section 3.4 of the v2.0.0 installation guide, but it doesn’t appear to get a mention at all on the later documents.

There’s some reference to an OpenCPI GUI; I had a go with that recently but it appeared to be in a bit of an alpha state (i.e. didn’t work at all well).

FWIW, I’m a software engineer and just interested in being able to browse through the C++ stuff with navigation between:

Example application
BSP
OpenCPI stuff

In the same sort of way I can work with projects in Eclipse, Visual Studio etc. Is there any way to do that? I couldn’t see anything that stood out as such in the documentation.

[cid:image001.png@01D88B1C.FC4587F0]
John McCabe
Principal Software Engineer
Kirintec Ltd

[cid:image002.png@01D88B1C.FC4587F0]

+44 (0) 1989 568350
[cid:image003.png@01D88B1C.FC4587F0]

+44 7551 547 473tel:+44%207551%20547%20473
[cid:image004.png@01D88B1C.FC4587F0]

jmccabe@kirintec.com mailto:jmccabe@kirintec.com
[cid:image005.png@01D88B1C.FC4587F0]

www.kirintec.com http://www.kirintec.com/
Follow us:
[cid:image006.png@01D88B1C.FC4587F0]https://en-gb.facebook.com/Kirintec/
[cid:image007.png@01D88B1C.FC4587F0]https://uk.linkedin.com/company/kirintec
[cid:image008.png@01D88B1C.FC4587F0]https://twitter.com/KirintecLtd
[cid:image009.png@01D88B1C.FC4587F0]https://www.kirintec.com/
Receipt of this e-mail is subject to conditions, view our email disclaimerhttps://www.kirintec.com/terms-and-conditions/. Kirintec Limited of Ross-on-Wye HR9 5PB is registered in England and Wales with the company number 6699502. Unless otherwise stated, the information contained in this email and its attachments are strictly confidential.

discuss mailing list -- discuss@lists.opencpi.org mailto:discuss@lists.opencpi.org
To unsubscribe send an email to discuss-leave@lists.opencpi.org mailto:discuss-leave@lists.opencpi.org

Thanks for that Aaron. Does an “Issue” need to be raised on the AngryViper repo to get the readme updated to clarify that? John McCabe Principal Software Engineer Kirintec Ltd +44 (0) 1989 568350 +44 7551 547 473 jmccabe@kirintec.com www.kirintec.com Follow us: Receipt of this e-mail is subject to conditions, view our email disclaimer. Kirintec Limited of Ross-on-Wye HR9 5PB is registered in England and Wales with the company number 6699502. Unless otherwise stated, the information contained in this email and its attachments are strictly confidential. From: Aaron Olivarez <aaron@olivarez.info> Sent: 28 June 2022 18:02 To: John McCabe <jmccabe@kirintec.com> Cc: discuss@lists.opencpi.org Subject: Re: [Discuss OpenCPI] Angry Viper status Hi John, We no longer support the Angry Viper eclipse plugin for OpenCPI. As of OpenCPI v2.3.4 documentation for it was removed. You are correct, the replacement for it is the OpenCPI GUI and it is currently in a Beta state. At this time there is no documentation related to working with OpenCPI assets within an integrated development environment (IDE). Aaron On Tue, Jun 28, 2022 at 10:36 AM John McCabe <jmccabe@kirintec.com<mailto:jmccabe@kirintec.com>> wrote: Is Angry Viper abandoned? The README on the repo at GitLab says installation is documented in section 3.4 of the v2.0.0 installation guide, but it doesn’t appear to get a mention at all on the later documents. There’s some reference to an OpenCPI GUI; I had a go with that recently but it appeared to be in a bit of an alpha state (i.e. didn’t work at all well). FWIW, I’m a software engineer and just interested in being able to browse through the C++ stuff with navigation between: 1. Example application 2. BSP 3. OpenCPI stuff In the same sort of way I can work with projects in Eclipse, Visual Studio etc. Is there any way to do that? I couldn’t see anything that stood out as such in the documentation. [cid:image001.png@01D88B1C.FC4587F0] John McCabe Principal Software Engineer Kirintec Ltd [cid:image002.png@01D88B1C.FC4587F0] +44 (0) 1989 568350 [cid:image003.png@01D88B1C.FC4587F0] +44 7551 547 473<tel:+44%207551%20547%20473> [cid:image004.png@01D88B1C.FC4587F0] jmccabe@kirintec.com<mailto:jmccabe@kirintec.com> [cid:image005.png@01D88B1C.FC4587F0] www.kirintec.com<http://www.kirintec.com/> Follow us: [cid:image006.png@01D88B1C.FC4587F0]<https://en-gb.facebook.com/Kirintec/> [cid:image007.png@01D88B1C.FC4587F0]<https://uk.linkedin.com/company/kirintec> [cid:image008.png@01D88B1C.FC4587F0]<https://twitter.com/KirintecLtd> [cid:image009.png@01D88B1C.FC4587F0]<https://www.kirintec.com/> Receipt of this e-mail is subject to conditions, view our email disclaimer<https://www.kirintec.com/terms-and-conditions/>. Kirintec Limited of Ross-on-Wye HR9 5PB is registered in England and Wales with the company number 6699502. Unless otherwise stated, the information contained in this email and its attachments are strictly confidential. _______________________________________________ discuss mailing list -- discuss@lists.opencpi.org<mailto:discuss@lists.opencpi.org> To unsubscribe send an email to discuss-leave@lists.opencpi.org<mailto:discuss-leave@lists.opencpi.org>